Fall Cross Over Scarf

sewing -> accessories

easy & quick - double crochet

back loop holds layers together

A back loop holds the layers together. Super fast & easy! The only stitches needed are DC (double crochet for body of scarf) and SC (single crochet for back loop).

Disclosure: This site contains affiliate links. As an Amazon Associate, I earn from qualifying purchases. Clicking on links, and purchasing products, may result in the seller paying us compensation - at no extra cost to you. Affiliate links are in green.

Also see:
Notes From The Workroom & Trail
10 Easy Sewing Projects
Craft Projects
Clothing Patterns

Easy To Add Variety To Your Scarf Design

change the length

alternate sections or rows of color

use variegated yarn

crochet only the back loop on each row to achieve a “ribbed” effect

use different types of yarn (larger, super soft and chunky - or smaller, with fun and fuzzy fibers)

add rows of another stitch, such as single crochet

SCARF SIZE

I created 50 rows of 20 DC stitches. My total scarf length was 34”. My scarf is approximately 5.5” in width. Add rows to lengthen, or extra stitches to widen - to suit your needs or taste.

SUPPLIES

YARN

For this scarf, I used a 4 oz weight 60% acrylic / 40% polyester yarn. I found the yarn at Hobby Lobby. It was only $4.99, and one 198 yard skein was enough for the scarf. The color is Evening Glow; the brand is Yarn Bee. If you do not have a Hobby Lobby near you, the brand is also on Amazon: Yarn Bee yarn.

I LOVE the colors! Perfect for fall - and it matches my fall veggie bowl. When I made my dinner, I decided it was time to create a fall scarf.

I LOVE all the textures and colors of yarn that are available. Choose colors to suit your needs or holiday.

Yarn Types
If making items that will be washed often (such as dishcloths), use cotton yarn. For my basket weave crochet pattern, that I will use for dishcloths, I will use cotton dishcloth yarn.

Wool holds up better than acrylic, which can become pilly (is that a word?) over time. I am allergic to wool, however, so I use an acrylic / poly blend. I really liked the yarn shown here.

Crochet Hook

This is a light-weight yarn that calls for a size G crochet hook. I crochet TIGHT so I tend to use size J or K for my scarves. I used a K hook for this project. Use what works best for you - the important thing is to obtain the correct overall width and length. You can do that by using larger yarn, larger hook, or adding stitches to width, or adding rows.

General Directions

You will need to start by getting your yarn onto your hook. There are many good YouTube videos on this, and illustrations on other websites. For a quick refresher, refer to my photos below.

Start by creating a loop.

Complete a “pretzel.”

Pull a the piece closest to ball of yarn onto the hook.

Tighten up the yarn ends into a knot, creating a loop on the hook.

Row 1: chain 20, turn. Then chain 3 more to be your first DC (double crochet) for row 2.

NOTE: Add or decrease DC stitches if you are not happy with the width.

Row 2: DC in the 4th chain from the hook. DC across 19 more for a total of 20 DC (including the first that was created with chain of 3).

Chain 3, turn. After each row of 20 DC is completed, you will chain three and turn the piece over to begin a new row. The 3 chains complete the first DC of the new row.

Rows 3 on: Repeat to 50 rows of 20 DC OR until your scarf is 34” in length (or to your desired length).

NOTE: Remember, you can add number of stitches to each row, and you can change the number of rows. It all depends on what width and length you desire.

Add Ribbed Effect

To make “ribbing”, pick up only the BACK loop on each row.

I did not add ribbing. My finished scarf measures 5.5” x 34”.

Add Back Loop

Check For Placement

Before adding the back loop, you will need to try on the scarf to decide just where the ends need to cross. Mark the layer that is ON TOP. I used two pins to mark the approximate location of where I wanted the back loop to be placed. I marked the top of the scarf - the loop will be placed on the BACK of this layer.

Create The Loop (this will hold the scarf layers together)

Chain 3, chain one more for turning. SC (single crochet) across the row (3 sc). Chain 1, turn. You will need 10 rows of 3 sc.

The back loop is 10 rows of 3 sc.

Attach Loop To Scarf

Turn your scarf over to the opposite side marked. Stitch the back loop to the back of the scarf, using a slip stitch. Use your crochet hook, or a darning needle and thread.

Loop is on back of one end of the scarf.

Pull The Opposite End Through Loop

Pull the opposite end through the loop - this holds the two layers together. This is now the BACK side of your scarf.

Simply slip the scarf over your head, adjust, and enjoy! Cozy and warm!

Related Projects

Learn this pattern of fpdc and bpck to create a beautiful basket weave texture. Use for scarves, placemats, dish cloths and more.

Crochet Basket Weave Sampler

Fully illustrated embroidery stitch glossary.

Embroidery Stitch Glossary

Learn the art of huck weaving. Lesson and 2 free patterns.

Swedish Huck Weaving

Articles & Tips